BẠN ĐANG NGHĨ GÌ?
Hãy cho chúng tôi biết nhu cầu của bạn - Chúng tôi sẽ cho bạn giải pháp

Hỗ trợ trực tuyến

Ampli PRS-4P125 Bosch công suât truyền thanh 4 kênh 125w

Liên hệ

Ampli PRS-4P125 Bosch công suât truyền thanh 4 kênh 125w

Đầu ra âm thanh 4 kênh 125w (lựa chọn từ đầu ra 100 / 70 / 50 V)
Xử lý âm thanh và độ trễ cho mỗi kênh của bộ khuếch đại
Giám sát bộ khuếch đại và chuyển sang bộ khuếch đại dự phòng
Đường truyền loa và giám sát đường truyền loa (LBB 4428/00 chỉ giám sát đường truyền)
Tám đầu vào điều khiển và 1, 2, 4 hoặc 8 đầu ra điều khiển
Bộ khuếch đại Công suất PRS‑4P125 4 x 125 W
Bộ khuếch đại công suất 4 kênh có kết nối mạng Praesideo, 4 x 125 W, bộ giá đỡ 2 RU.

Số lượng: *

Ampli PRS-4P125 Bosch công suât truyền thanh 4 kênh 125w

Đầu ra âm thanh 4 kênh 125w  (lựa chọn từ đầu ra 100 / 70 / 50 V)
Xử lý âm thanh và độ trễ cho mỗi kênh của bộ khuếch đại
Giám sát bộ khuếch đại và chuyển sang bộ khuếch đại dự phòng
Đường truyền loa và giám sát đường truyền loa (LBB 4428/00 chỉ giám sát đường truyền)
Tám đầu vào điều khiển và 1, 2, 4 hoặc 8 đầu ra điều khiển
Bộ khuếch đại Công suất PRS-4P125 4 x 125 W
Bộ khuếch đại công suất 4 kênh có kết nối mạng Praesideo, 4 x 125 W, bộ giá đỡ 2 RU.

Functions PRS-4P125

The Power Amplifiers receive input signals over the network. They also have two auxiliary audio inputs (four for LBB 4428/00) for local audio. Their eight control inputs are freely programmable for system actions, and priorities can be assigned to these inputs. Each control input has the ability to monitor the attached line for open and short-circuits. Control outputs are freely programmable for faults and call related actions.

The 2 x 16‑character display and the rotary control enable local status enquiries. The display shows the VU‑meter reading, when the audio monitoring mode is active. Audio can be monitored by headphone.

The units are self-monitoring and continually report their status to the network controller. They support both single branch and redundant loop cabling. The amplifiers have a changeover facility for spare power amplifier switching. Changeover relays are included with the units. The amplifiers have a 48 V DC back-up supply input.

The digital audio processing can handle three parametric equalization sections and two shelving equalization sections per channel with configurable audio delay.

Specifications PRS-4P125

   PRS-4P125 115 / 230 VAC ±10%, 50/60 Hz
   LBB 4428/00 100 to 240 VAC ±10%, 50/60 Hz
Power consumption Pmax -3 dB* / idle** / standby
   PRS‑1P500 350 / 50 / 20 W
   PRS‑2P250 350 / 53 / 21 W
   PRS‑4P125 350 / 66 / 23 W
   LBB 4428/00 430 / 90 / 32 W
Voltage 48 VDC -10% to +20%
Power consumption Pmax -3 dB* / idle** / standby
   PRS‑1P500 330 / 40 / 10 W
   PRS‑2P250 330 / 43 / 11 W
   PRS‑4P125 330 / 56 / 13 W
   LBB 4428/00 400 / 65 / 22 W
Mic/line inputs 2 x (4 x for LBB 4428/00)
Connector 6-pole header for removable screw connector (mono, balanced)
   Frequency response -3 dB @ 50 Hz and 20 kHz (±1 dB)
   S/N >87 dBA
   CMRR >40 dB @ 1 kHz
   Input range -6 dBV to 6 dBV
   Input impedance 22 kohm

SẢN PHẨM LIÊN QUAN

Thong ke