PLN-ILR Bosch

PLN-ILR Bosch

Giám sát hệ thống vòng lặp quy nạp
Kiểm tra nhanh cường độ trường
Bao gồm dây đeo cổ để người dùng thiết bị trợ thính sử dụng mà không cần cài đặt “T”.
Tai nghe bao gồm
Dùng hai pin sạc AAA hoặc pin kiềm

PLN-ILR Plena Inductive Loop Receiver 
Inductive loop receiver, portable device for receiving the field from an inductive loop for assistive listening device users.

The Plena inductive loop receiver is a compact, portable device intended to receive the field from an inductive loop for assistive listening device users. It can be used to monitor the field strength and quality of the inductive loop system such as from the Bosch Plena PLN‑1LA10.

Functions

For non assistive listening device users it is difficult to verify the correct working of the inductive loop system. The field strength has to be in well defined limits, not too high or too low. Also if a user indicates an incorrect functioning it may be cause by the hearing aid itself or perhaps hum injected by other sources. By using the PLN-ILR the audio quality can be monitored and the field strength can be set easily by observing the two LEDs. To promote the use at the correct level, the display showing field strength is on the side of the unit. When a user holds the receiver up to eye level, the coil is automatically placed in the same plane as the assistive listening device. When used with a neck cord (included), the orientation is also vertical so the lightweight unit can be used for extended periods of time.

The PLN-ILR is priced attractively so it can also be used in larger numbers to help users who do not have a T-setting on their hearing aid. Certifications and approvals Safety acc. to EN

Thông số kỹ thuật PLN-ILR